Legacy Products Archive - Vivax

vLocDM2 Receiver

September 20, 2017July 15, 2021

The vLocDM2 (Defect Mapper) uses the latest locating and signal processing techniques to plot the current gradient of an industry standard low frequency (3Hz or 4Hz) profiling current. The current is applied at CP stations, so the disruption of the pipeline can be minimized. The non-intrusive measuring device, the vLocDM2 receiver, takes measurements along the...

vLocPro2 (VLP2) Receiver

September 19, 2017July 15, 2021

The vLocPro2 (VLP2) utility locator receiver was designed to meet the tough requirements of the modern world. With more and more utilities being buried each day and also abandoned each day, it truly is a jungle beneath the ground. Today’s locator must not only trace the path of a buried utility, it must assure the...

Spar 300

April 9, 2017November 30, 2022

The Spar 300 family represents a comprehensive approach to surveying and mapping underground utilities. It is fully integrated with the Trimble® Access surveying environment, and operates seamlessly with Trimble® GNSS receivers, may be used with Trimble® Total Stations and is available from many Trimble® dealers. The Spar employs a set of magnetic field sensors to accurately...

vLoc2 Accessory A-Frame

March 17, 2017March 9, 2022

The vLoc2 Series Accessory A-Frame accessory is used to detect ground faults on pipes and cables. In the case of pipes, the faults consist of coating defects. In the case of cables, faults are usually caused by insulation damage allowing the metallic sheath (or internal conductor) to become in contact with the ground. It is...